Merkezi Delme Aletleri Paslanmaz Çelik

Tanım

Tanım

Center Punch Tools

eşya yok. HJ-16020

For 3/8″ 5/8″ punch lock clamp

Center punch tool,its special design for çelik bant çemberleme,denizde yaygın olarak kullanılır, hortum takımları gibi benzin sistemi, cable bundling and general fastening.It’s high quality,dayanıklı.

Center Punch Tools

Paketleme: İç kutu ve oluklu mukavva veya müşterinin gereksinimleri olarak.

Operating Instructions:

1.Load clamp.Push tension handle forward. Insert center punch clamp tail and push all the way into tool.

2.Tighten clamp.Tighten the clamp with short downward strokes.Tension handle should be in down position at completion of tightening clamp.

3.Lock clamp.Holding tension handle down, lock clamp by hitting punch at least twice with 2 lb. Mallet.

4.Remove clamp tail.Hold work-piece, pivot the tool back, forth to break off clamp tail. Remove tail from tool by operating tension handle. When tail has moved through holding dog, raise tension handle and pull tail free.

Safety Precautions:

1. Read this manual，become familiar with the tool before use.
2. Do not use tool on live electrical sources.
3.Protective eyewear should be worn during use.
4.Wear appropriate gloves for handling steel.
5. When applying clamps, insure fingers are not in contact with
the clamp during installation.

Şirket Profili

Sertifikasyon

Paketleme ve Nakliye