Center Punch Tool

Manuel Merkez Delme Aleti

Manual center punch tool is a kind of strapping tools. Birçok kullanımı vardır, birçok yerde kullanılabilecek. It is widely used in marine, hortum takımları gibi benzin sistemi, hydraulic hose coupling assembly. Özel tasarımı ile, which has a great effect everywhere. Ve birçok özelliği var. Yüksek kaliteli ve dayanıklıdır. It is not easy to rust and aging, corrosion resistance, uzun hizmet ömrü. And it’s easy to install and operate. Bu, işçilere zaman kazandırabilir ve verimliliği artırabilir.

Here are some safety precautions about the merkezi yumruk aracı. Birinci, read this manual, become familiar with the tool before use. And don’t use the tool on live electrical sources. Daha sonra, protective eyewear should be worn during use. Wear appropriate gloves for handling steel. Daha sonra, when applying clamps, insure fingers are not in contact with the clamp during installation. In short, you can familiarwith the tool, so that you can easily install and operate it.

Operating Instructions

Birinci, you should load clamp. Push tension handle forward. Insert center punch clamp tail and push all the way into tool. Saniye, you should tighten clamp. Tighten the clamp with short downward strokes. Tension handle should be in down position at completion of tightening clamp. Don’t lift tension handle too high as it may open up buckle pusher, resulting in improper clamp application. If clamp tension needs to be released before locking, move handle forward and move slide back against spring. This raises pulling down and releases clamp tension. Daha sonra, lock clamp. Holding tension handle down, lock clamp by hitting punch at least twice with 2 lb. Mallet. Daha sonra, remove clamp tail. Hold work-piece, pivot the tool back, forth to break off clamp tail. Remove tail from tool by operating tension handle. When tail has moved through holding dog, raise tension handle and pull tail free.

Hongjing center punch tools are all high quality and durable. Our packing and service are both good. Bu yüzden lütfen bize mümkün olduğunca güvenin. If you need this center punch clamp, please feel free to consult. Welcome your inquiry!