سٹینلیس سٹیل بینڈنگ ٹول کا استعمال کیسے کریں۔

Short description of banding tool

How to use stainless steel banding tool? پہلا, ہمیں یہ جاننے کی ضرورت ہے کہ بینڈنگ ٹول کیا ہے۔. بینڈنگ ٹول ایک قسم کا تناؤ کا آلہ ہے۔. یہ عام ٹائیننگ اور کیبل بنڈلنگ کے لیے ہے۔. اس ٹول کا کام اس بات کو یقینی بنانا ہے کہ آپ کی بینڈنگ قطب اور پیکج کے گرد تنگ ہو۔. یہ زیادہ تر ایپلی کیشنز میں استعمال کیا جا سکتا ہے۔. یہ ٹول لائٹ ڈیوٹی ایپلی کیشن سے ہیوی ڈیوٹی ایپلی کیشن کے لیے اچھا ہے۔. ہمارے بینڈنگ ٹولز کی تصاویر یہ ہیں۔.

Blue one is standard پٹی باندھنے کا آلہ. It is for band width from 3/8” to 3/4”. The sliver one is giant banding tool. It is much heavier than standard banding tool. This tool is for band width from 3/8” 1-1/2 تک”. کبھی کبھی, we can use this for band up to 1-3/4”. Both of them can use with our سٹینلیس سٹیل بینڈ, بکسوا and wing seal. They are aslo can be used with carbon steel banding strap. Stainless steel bands and buckles have a lot of sizes and different materials. You can check through our product page.

How to use stainless steel banding tool?

The operation of stainless steel banding tool is easy. پہلا, we need to prepare fastening objects. We need a stainless steel band with suitable length, one buckle or seal, a hammer and our banding tool. (The length of band is about 15-20cm longer than your pole diameter.)

There are detailed steps:

1. Silde buckle on band as shown. Bend one end of band under buckle.

2. Bring the other end of band around pole or clamp and again through buckle. Shown as picture. If you want more radial compression, you can continue band around pole once more.

3. Place band in open slot of tool nose and in slide. Apply tension by turning handle of tool.

4. Put finger on the band in front of tool nost while tensioning. Once enough tension is applied, the tool will be forward to the buckle. When you feel the band stop moving through buckle, stop turning handle.

5. Put the cutting handle to cut the band.

6. Gently hammer down the band into the buckle.

7. Clinch stub by hammering down buckle ears. Finish the whole operation.

These are all steps of using stainless steel banding tool to fasten band and buckle. It is easy, right? During the operating, please make sure you wear the glooves and long sleeved shirt for security purpose.