Center Punch Tool

Ручний центральний перфоратор

Manual center punch tool is a kind of strapping tools. Він має багато застосувань, which can be use in the many places. It is widely used in marine, petrol system such as hose assemblies, hydraulic hose coupling assembly. З його особливим дизайном, which has a great effect everywhere. And it has many features. Він якісний і довговічний. It is not easy to rust and aging, corrosion resistance, long service life. And it’s easy to install and operate. Що може заощадити час працівників і підвищити ефективність.

Here are some safety precautions about the center punch tool. Спочатку, read this manual, become familiar with the tool before use. And don’t use the tool on live electrical sources. Then, protective eyewear should be worn during use. Wear appropriate gloves for handling steel. Then, when applying clamps, insure fingers are not in contact with the clamp during installation. Коротко, you can familiarwith the tool, so that you can easily install and operate it.

Operating Instructions

Спочатку, you should load clamp. Push tension handle forward. Insert center punch clamp tail and push all the way into tool. Second, you should tighten clamp. Tighten the clamp with short downward strokes. Tension handle should be in down position at completion of tightening clamp. Don’t lift tension handle too high as it may open up buckle pusher, resulting in improper clamp application. If clamp tension needs to be released before locking, move handle forward and move slide back against spring. This raises pulling down and releases clamp tension. Then, lock clamp. Holding tension handle down, lock clamp by hitting punch at least twice with 2 lb. Mallet. Then, remove clamp tail. Hold work-piece, pivot the tool back, forth to break off clamp tail. Remove tail from tool by operating tension handle. When tail has moved through holding dog, raise tension handle and pull tail free.

Hongjing center punch tools are all high quality and durable. Our packing and service are both good. Тому, будь ласка, довіряйте нам якомога більше. If you need this center punch clamp, please feel free to consult. Welcome your inquiry!