Center Punch Tools Stainless Steel
Center Punch Tools,Stainless Steel Center Punch Tools,Center Punch Clamp Tool,Punch Banding ကိရိယာများ,Manual Center Punch Tool
- ဖော်ပြချက်
- စုံစမ်းရေး
ဖော်ပြချက်
ဖော်ပြချက်
Center Punch Tools
ပစ္စည်းနံပါတ်. HJ-16020
For 3/8″ 5/8″ punch lock clamp
Center punch tool,its special design for steel band strapping,၎င်းကို ပင်လယ်ရေကြောင်းတွင် တွင်ကျယ်စွာအသုံးပြုသည်။, ပိုက်လိုင်းများကဲ့သို့သော ဓာတ်ဆီစနစ်, cable bundling and general fastening.It’s high quality,durable.
Center Punch Tools
Packing: အတွင်းသေတ္တာနှင့် ဖော့ပုံးပုံး သို့မဟုတ် ဖောက်သည်၏ လိုအပ်ချက်အတိုင်း.
လုပ်ငန်းလည်ပတ်ညွှန်ကြားချက်:
1.Load clamp.Push tension handle forward. အလယ်တည့်တည့်တွင် ကုပ်ကုပ်အမြီးကို ထည့်သွင်းပြီး ကိရိယာထဲသို့ တွန်းထည့်ပါ။.
2.Tighten clamp.Tighten the clamp with short downward strokes.Tension handle should be in down position at completion of tightening clamp.
3.Lock clamp.Holding tension handle down, သော့ခတ်ကုပ်နှင့်အတူအနည်းဆုံးနှစ်ကြိမ်ထိပုတ်ပါ 2 ပေါင်. ကုန်တိုက်.
4.Remove clamp tail.Hold work-piece, ကိရိယာကို နောက်ပြန်လှည့်ပါ။, ကုပ်အမြီးကို ဖြတ်ရန် ထွက်လာသည်။. လည်ပတ်တင်းအားလက်ကိုင်ဖြင့် ကိရိယာမှအမြီးကို ဖယ်ရှားပါ။. အမြီးရွေ့သွားသောအခါ ခွေးကို ကိုင်ထားသည်။, တင်းအားမြှင့်ပြီး အမြီးလွတ်ဆွဲပါ။.
Safety Precautions:
1. Read this manual,အသုံးမပြုမီ tool နှင့်ရင်းနှီးအောင်လုပ်ပါ။.
2. Do not use tool on live electrical sources.
3.Protective eyewear should be worn during use.
4.သံမဏိကိုင်တွယ်ရန် သင့်လျော်သော လက်အိတ်များ ဝတ်ဆင်ပါ။.
5. When applying clamps, insure fingers are not in contact with
the clamp during installation.
ကုမ္ပဏီအကြောင်း
အောင်လက်မှတ်
ထုပ်ပိုးခြင်းနှင့် ပို့ဆောင်ခြင်း။