간략한 소개

가이 그립 데드 엔드

Guy grip dead end is kind of overhead pole line products. 그것은 많은 용도가 있습니다, and it can be use in the many places. It can be use for the installation of bare conductors or overhead insulate conductors for transmission and distribution lines. The reliability and economic performance of the product. Which is better than the bolt type and hydraulic type tension clamp. That can be use in the current circuit. And this unique, one-piece dead-end is neat in appearance and free from bolts or high-stress holding devices. It can be of galvanized steel or aluminium clad steel.

The guy grip can be use to fix a variety of tower cable. Which can replace the current commonly used fixed cable UT wire clip and wedge type wire clip.

기능:

1. The clamp and the pull wire have a large contact area, the stress distribution is uniform. And there is no stress concentration point. The achievable grip strength is not less than 95% of the calculated breaking force of the stranded wire.

2. The cable clip is made of the same material as the cable, which has the good corrosion resistance.

3. It’s easy to install, and no tools are required. One person can complete it independently. The installation quality is consistent, and it is also convenient for inspection.

4. It has better vibration resistance, which can better protect the cable and prolong the life of the system.

5. It is suitable for pull wires of various cross-sectional sizes.

Hongjing is an ISO9001 certificated manufacturer and exporter which specializes in OEM&ODM 금속 하드웨어 제품. Our products are high quality and our service is good. So trust us as much as possible. If you need this guy grip or any other hardware products, 편하게 상담해주세요.